Enfocus Griffin Auto API ({{version}})

Job ID

Job name

Job contact person

Job phone number

Job client name

Job notes

Job units

Enable this option to ignore the predefined PDF user units in artworks

Path to artwork file to use for front-side content on this artwork piece

Page of artwork to use for front-side content on this artwork piece, defaults to page 1 when not defined

Path to artwork file for back-side content when backside type is Artwork

Path to artwork file for back-side content when back content type is Artwork

Page of back artwork file to use for back-side content when back content type is Artwork

Quantity of this artwork piece to produce

Flutes direction of artwork if any

Width to scale artwork to either as scalar value or percentage of original artwork size

Height to scale artwork to either as scalar value or percentage of original artwork size

Shape handling mode to use when finding closed path shapes from the dielines in the artwork. 'Multiple' mode will create a new artwork item for each closed path shape detected in the artwork.

Whether to scale proportionally when either width or height are not specified. When false, only the dimension that is specified is scaled. Defaults to false.

Artwork bleed clipping mask type

Offset amount from artwork piece shape to clip the artwork content when bleed type is Offset

Spacing type used during nesting to ensure this artwork piece is placed far enough away from others

Spacing offset amount from artwork piece shape when spacing type is Offset

Tool types and corresponding mappings used to map paths in the artwork content or artwork dimensions to the correct tool type. The first tool in this list with category 'Cut' is used as the default cutting tool for cases where there are no artwork paths and artwork content box is used as dieshape

Barcodes to apply to this artwork

Corner to apply to this artwork

Fill marks to apply to this artwork

Grommet marks to apply to this artwork

Text marks to apply to this artwork

Cutting tool type to use for the generated cut tool path

Quality of the raster image to use for generating the cut tool path. A value of 100% will rasterize the image at full size up to a limit of 10 megapixels. Lower values will scale the image down for faster processing and in some case preferred results as less detail is used for tracing.

Amount of color difference to allow before adjacent colors are considered different. A value of 0% means no tolerance in color differences is allowed while 100% is the maximum allowed tolerance in color differences.

The amount of blurring to apply to edges that are encountered during edge detection. A higher blur radius means more blurring is applied during edge detection which can lead to less jagged paths.

The amount of simplification to apply to the generated path. Simplify works by removing points on the path that are within a certain tolerance. A value of 0% disables path simplification while a value of 100% will use the highest allowed tolerance when removing points.

Smoothing converts individual points on the generated path to Bezier curves to produce smoother paths. A value of 0% disables path smoothing while a value of 100% will perform the most aggressive path curve smoothing.

Additional offset distance to expand the generated path.

ID of action resource is being applied to (Hot Folders only)

Full path to store output file(s). When not set, the output file(s) will be stored on the server and download link(s) will be provided in the response.

DXF version to generate

Units to use in DXF

Character encoding to use. Note: For DXF versions 2007 and later UTF-8 encoding is always used and this setting is ignored.

Whether or not to include barcode marks in cutting output

Whether or not to include border marks in cutting output

Whether or not to include camera marks in cutting output

Whether or not to include corner marks in cutting output

Whether or not to include grommet marks in cutting output

Whether or not to include fill marks in cutting output

Whether or not to include waste divider marks in cutting output

Whether or not to include fotoba marks in cutting output

Tool used during post-press cutting, creasing, etc.

ID of action resource is being applied to (Hot Folders only)

Full path to store output file(s). When not set, the output file(s) will be stored on the server and download link(s) will be provided in the response.

The Job ID name to use for this export

The descriptive name for this export

This value indicates whether to include a preview with the JDF file

The barcode layer to use for this export

ID of action resource is being applied to (Hot Folders only)

Full path to store output file(s). When not set, the output file(s) will be stored on the server and download link(s) will be provided in the response.

Job name to use in ZCC. Job name can include dynamic keywords like <project.filename> and <layout.random>.

The cutting mode to use in Zund Cut Center

ID of action resource is being applied to (Hot Folders only)

Full path to store output file(s). When not set, the output file(s) will be stored on the server and download link(s) will be provided in the response.

ID of action resource is being applied to (Hot Folders only)

Full path to store output file(s). When not set, the output file(s) will be stored on the server and download link(s) will be provided in the response.

Whether to output the artwork details in the report.

The number of decimal places to display.

The size of page to export.

ID of action resource is being applied to (Hot Folders only)

Full path to store output file(s). When not set, the output file(s) will be stored on the server and download link(s) will be provided in the response.

Layout file grouping option controls whether layouts are exported as a single file or as separate files per layout or per layout side

Whether or not to include barcode marks in cutting output

Whether or not to include border marks in cutting output

Whether or not to include camera marks in cutting output

Whether or not to include corner marks in cutting output

Whether or not to include grommet marks in cutting output

Whether or not to include text marks in cutting output

Whether or not to include fill marks in cutting output

use this option if you are working with layouts with dimensions over 200 inches (roughly 5 meters) and your cutting device supports the PDF 1.6 ‘UserUnit’ field to address size limitations in the PDF specification. Defaults to true when not specified.

Whether or not to include waste divider marks in cutting output

Whether or not to include fotoba marks in cutting output

ID of action resource is being applied to (Hot Folders only)

Full path to store output file(s). When not set, the output file(s) will be stored on the server and download link(s) will be provided in the response.

Layout file grouping option controls whether layouts are exported as a single file or as separate files per layout or per layout side

Whether to output repeated pages for multi-copy layouts. See 'allow-copies' nesting setting.

If enabled, original tool paths in the artwork content are removed in the printing PDF. Currently only tool paths defined as spot colors can be removed.

ID of action resource is being applied to (Hot Folders only)

Full path to store output file(s). When not set, the output file(s) will be stored on the server and download link(s) will be provided in the response.

The size of page to export.

ID of action resource is being applied to (Hot Folders only)

Full path to store output file(s). When not set, the output file(s) will be stored on the server and download link(s) will be provided in the response.

ID of action resource is being applied to (Hot Folders only)

Type of substrate to nest artwork pieces onto. Defaults to Roll when not specified.

Width of substrate to nest artwork pieces onto

Height of substrate to nest artwork pieces onto for Board substrate type. This setting is ignored when substrate type is Roll but required when substrate type is Board.

Flutes direction of sheet for boards. This setting is ignored when substrate type is Roll where flutes are assumed to run in the direction of the roll. For Board substrate, this setting defaults to None when not specified.

Optional name of substrate used in reporting and Zund Cut Center (ZCC) cutting output

Substrate thickness. Thickness is included in reporting and Zund Cut Center (ZCC) cutting output to automatically match the substrate with the corresponding material in Zund Cut Center.

Minimum roll cutoff height when substrate type is Roll

Maximum roll cutoff height when substrate type is Roll

Left, top, right and bottom scalar margins entity

Type of nesting to perform

First cut option when nesting type is Guillotine

Type of rotation to allow during nesting

Vertical position on the layout to align nested artwork pieces

Horizontal position on the layout to align nested artwork pieces

Workstyle when handling double-sided work

Whether to separate single- and double-sided artwork into separate layouts or allow them to be combined within the same layout. Defaults to false (allow mixing) when not specified.

Whether to allow multiple layout copies. When not specified, mulitple layout copies are assumed to be allowed by the nesting tool.

Barcodes to apply to all layouts

Border to apply to all layouts

Camera marks to apply to all layouts

Corner to apply to all layouts

Shape marks to apply to all layouts

Text marks to apply to all layouts

Waste dividers to apply to all layouts